Disc Cutter Set Of 4 Pcs Oval - 13 X 18, 16 X 21, 19 X 24, 22 X 30 MM On Wooden Stand

Disc Cutter Set Of 4 Pcs Oval - 13 X 18, 16 X 21, 19 X 24, 22 X 30 MM On Wooden Stand

G.T.W 442.26

MADE OF: TEMPERED STEEL

SIZE: 13 x 18, 16 x 21, 19 x 24, 22 x 30 MM Diameter punches

Disc Cutters are a useful tool for any jeweler. They punch discs from sheet metal, but can also be used to punch holes in a number of different materials including metal, paper, card and leather. Disc Cutting Set will cut a maximum of 0.7mm sheet.  Remove all cutters before use. To operate, insert your metal sheet into center slit under the circle required. Insert the corresponding cutter and strike with a hammer, preferably a brass mallet (G.T.W 540 A or B). The metal disc will be stamped from the metal sheet and can be found on the underside of the tool. The disc stamped will be the same diameter as the cutter used. Made from steel. Please note, metal sheet should be annealed before stamping, and should be no greater than 0.7mm thick.